1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal the lid,to avoid the product due to moisture absorption scrapped.
3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
Tips:
1. When used to communicate with food after recovery, the temperature of the food must not exceed 0 degrees Celsius.
2. If the hardness is higher than 82D (sha hardness), it can be polished immediately.
3. The mixing quantity must not exceed 5 kg and the thickness of the casting must not exceed 3 cm per layer.
4. If the temperature is above 25 degrees Celsius, it will recover quickly, please reduce the number of mixing / pouring by half, or it will be hard in the container;
5. The curing time will depend on the room temperature and the thickness of the casting, the room temperature is higher, the curing faster. This reduces the healing time required to lose weight
FAQ:
1.Why choose us?
We have done many OEMs, enable us to suggest you the best solution.
Bulk orders will be deducted from the total amount.
2. How to keep the Epoxy resin?
The shelf life of the product is 12 months; keep away from direct sunlight exposure and always keep the cap sealed.
3. There is a missing product in the package. what do i do?
Contact our support team and we'll confirm your order with the contents of the package. We apologize for any inconvenience.
4. What is the curing time?
The cured time of the gel depends on different situation, ex: the depth of the mold, the color of the gel or the light source.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized
